Jotun antifouling Paint

It is important to spot the best antifouling to fit aided by the existing paint system on the boat. You will find three approaches to secure a proper option:

  1. Knowing which antifouling is currently applied on the ship, follow the compatibility table below.
  2. If existing antifouling is as yet not known, use a sealing coat of Vinyl Primer prior to using the antifouling.
  3. If existing paint system is damaged, pull coat by coating until a total and undamaged coating is identified. (paint or initial substrate). Sand the substrate thereby applying primer in accordance with the suggested paint system for that certain substrate ahead of using antifouling.
Being pick the correct antifouling for your vessel and use, it is vital to give consideration to form of vessel, consumption frequency, geographic place, present antifouling and whether or not the ship is frequently transported by truck. Also consider ecological aspects and local laws.

There are various types of antifouling available, and can be split into two main groups:

  1. Self-polishing
    The biocide therefore the resin tend to be mixed in a foreseeable rate. As a result often there is a new fresh layer of antifouling touching the sea liquid maintaining a consistent leaching price of the biocides through the whole service life of this product. Over-all technology for most types of boats. Ideal for cruisers and cruising lovers.
  2. Tough
    The binder is insoluble, so that the leaching rate of biocide is certainly not constant, while the overall performance regarding the product decreases increasingly through the entire period. Specifically suited to speed boats. Abrasion resistant item. An easy task to sand. Could be polished to offer a smooth surface.

Copyright © . All Rights Reserved